Beckhoff M1400 Manuel d'utilisateur télécharger pdf (Page 8)

M1400 Parallel Input / Output Beckhoff II/O-System

Page 8 of 16 Version : 2.0 Date : 26.7.94

View under the M1400 XILINX board

The following module configuration is possible by setting jumpers 1 to 3 :

Jumper 1

Watchdog on / off

for Port D0 and D1

If this jumper is set the ’Watchdog’ function is switched off.

This means if an error is detected the outputs set of Port D0

and D1 are not switched off.

Jumper 2

Watchdog on / off

for Port D2 und D3

If this jumper is set the ’Watchdog’ function is switched off.

This means if an error is detected the outputs set of Port D2

and D3 are not switched off.

Jumper 3

Latch on / off

standard configuration is jumper ’set’

input are latched in intervals of 6,8 ms

otherwise inputs are latched permanently

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Beckhoff M1400 Manuel d'utilisateur Page 8