
VGA/DVI Chapter: Connectors
Beckhoff New Automation Technology CB2051 page 31
3.13 VGA/DVI
The module is equipped with a standard DVI-I-connector, which can be used to connect either a DVI
capable display or a standard VGA CRT – using a DVI-DSUB adapter, if necessary.
Pin Name Description
1 TMDSDAT2# DVI data 2
2 TMDSDAT2 DVI data 2
3 GND ground
4 N/C reserved
5 N/C reserved
6 DDC CLK DDC clock (DVI/VGA)
7 DDC DAT DDC data (DVI/VGA)
8 VSYNC VGA vertical sync
9 TMDSDAT1# DVI data 1
10 TMDSDAT1 DVI data 1
11 GND ground
12 N/C reserved
13 N/C reserved
14 VCC 5 volt supply
15 GND ground
16 HP_DETECT hot plug detect
17 TMDSDAT0# DVI data 0
18 TMDSDAT0 DVI data 0
19 GND ground
20 N/C reserved
21 N/C reserved
22 GND ground
23 TMDS CLK DVI clock
24 TMDS CLK# DVI clock
C1 RED VGA red
C2 GREEN VGA green
C3 BLUE VGA blue
C4 HSYNC VGA horizontal sync
C5 GND ground
Commentaires sur ces manuels