Beckhoff KL2502 Manuel d'utilisateur télécharger pdf (Page 20)

Terminal configuration

18 KL2502, KL2512

Interbus Coupler BK4000 By default, the Interbus coupler BK4000 maps the KL2502 with 6 bytes of

input and 6 bytes of output data. Parameterization via the field bus is not

possible. The KS2000 software is needed for configuration if it is intended

to use the control / status byte.

Offset Terminal1 Channel1 = 0

Offset Terminal1 Channel2 = 3

Offset Terminal2 Channel1 = 6

KL 2502 Channel1

KL 2502 Channel 2

The control-/ status byte

must be inserted for

parameterization (KS2000).

K- Bus

Interbus bus coupler

BK4000

To the bus terminal

Data H

Data L

D1 - 0

D0 - 0

D0 - 1

D1 - 1

C/ S - 0

C/ S - 1

The terminal is

mapped in the

bus coupler.

Other bus couplers and

further information

You will find further information on the mapping configuration of bus

couplers in the the respective bus coupler manual under the heading of

"Configuration of Masters".

Note

The annex contains an overview of the possible mapping configurations

depending on the adjustable parameters.

Parameterization with

KS2000

Parameterization operations can be carried out independently of the field

bus system using the Beckhoff KS2000 configuration software via the

serial configuration interface in the bus coupler.

1 2 ... 15 16 17 18 19 20 21

Pas de commentaire

Beckhoff KL2502 Manuel d'utilisateur Page 20