Beckhoff CP29xx Manuel d'utilisateur télécharger pdf (Page 12)

Product Description

2.4.2 USB-Extended Input (X 105)

X105

Connection via standard-RJ45-cabel, not crossed

The Control Panel is connected with the CU8801 USB to USB extended converter box via the USB-

Extended input (X 105).

In order to realize a distance of 50 m without hubs, with USB extended the USB signal is converted so

that it can be transferred via 50 m CAT5 cables commonly used for Ethernet wiring. In the Control Panel

the signal is converted back to USB.

2.4.3 USB in (X 104)

X104

USB type B, PCB installation (FCI 61729-0010B USB Receptacle B-Type)

The Control Panel is connected with the Industrial PC via the USB port (X 104, connector type B).

USB3.0 standard is supported.

Pin Signal Pin Signal

1 5V 3 D+

2 D- 4 GND

2.4.4 USB out (X 102, X 103)

X102, X103

USB Type-A twin circuit board mounting (FCI 72309-0030B USB Double Receptacle A-Type)

The two USB interfaces (X102, X103, connector type A) are used for connecting peripheral devices with

USB connection. USB3.0 standard is supported in a distance of up to 5 m from the PC, from a distance of

5 m up to 50 m USB2.0 standard is supported.

Pin Signal Pin Signal

1 5V 3 D+

2 D- 4 GND

2.4.5 Ground connection

The Control Panel is grounded via the screw connection (Ground).

Malfunction possible with missing ground connection

Note

A proper ground connection of the device is absolutely necessary for the correct

function of the touchscreen.

10 CP29xx

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 32 33

Pas de commentaire

Beckhoff CP29xx Manuel d'utilisateur Page 12